Stream live test results from the IMT100x, EVT100X, and MTR105X [09-0000]
How to stream live test results to CertSuite Asset from the:
- IMT100X industrial multi-tester
- EVT100X electric vehicle tester
- MTR105X rotating machine tester
To stream live test results you first need a Bluetooth connection: with the tester turned on, open CertSuite Asset ...
- Tap the red 'Connect BT' button (top right of the screen)
- CertSuite looks for the available Bluetooth devices
- Serial numbers of the available devices are listed in the 'Instrument Data' panel
- Tap the blue button that displays the serial number matching your device
- Once there is a successful connection the red 'Connect BT' button in CertSuite Asset turns green
- The button also displays the serial number of the connected device
Once the Bluetooth connection is established, tap the white 'plus' button at the bottom of the screen in CertSuite:
- The 'Add New Test' screen appears
- Tap the 'Instrument Data' button, and at the next screen the 'Bluetooth' button
- On the tester - press and hold the 'save' button (left hand button of the three) for 3 seconds
- The test data now live streams to CertSuite - where the results can be viewed as graphs, and as tables
- Press the 'save' button again to end the test
- The test results can be printed from CertSuite
Any questions or feedback please contact: software@megger.com
[Article 09-0000-00]