Download stored data from the DLRO2X low resistance ohmmeter [09-0000]
How to download stored data to CertSuite Asset from the DLRO2X handheld low resistance ohmmeter 2 A
To download data you first need a Bluetooth connection: with the tester turned on, open CertSuite Asset ...
- On the tester, turn the rotary switch to the blue 'Data storage mode' setting
- In CertSuite, tap the red 'Connect BT' button at the top right hand corner of the screen
- CertSuite looks for available Bluetooth devices: serial numbers appear in the 'Instrument Data' box
- Tap the blue button that displays the serial number matching your device
- When the connection is made, the red 'Connect BT' button (top right of the screen) turns green, and displays the serial number in question
- With a bluetooth connection the '+' key, on the left hand side of the four multifunction soft keys, becomes a download button, which is activated when the hot key is pressed
With Bluetooth connected, tap the white 'plus' button at the bottom of the screen in CertSuite, to add a new test:
- The 'Add New Test' screen appears
- Tap the 'Instrument Data' button, and at the next screen the 'Bluetooth' button
- On the tester, press the download key (the left hand key, of the four)
- The tester now gives the option of exporting (i.e. downloading) just the asset in question, or all of the assets in the memory of the tester; you can also cancel the download
- If you choose 'all assets', the tester displays the message 'Exporting data', while in CertSuite the status of the download is shown with a progress bar and file count in the 'Import DLRO2X test from file' screen
- When the download is completed the DLRO2X displays the message 'Export successful'
- At this point the Bluetooth connection breaks: and in CertSuite the 'Connect BT' button turns from green to red
To access the downloaded data, tap the blue 'Get Data' button in the 'Test Details' screen in CertSuite
- At the next screen, 'Get Data', tap the left hand button, 'Saved Data'
- The 'Instrument Data' panel appears, with a list of the available tests
- For every test, the list displays the name of the asset; the type of test; the date and time of the test; and the date and time of the download
- To view test results, check the radio button of the test in question, and then tap the blue 'Import Test Results' button
- The test results, in table format, can then be viewed in CertSuite
- All test results in CertSuite Asset can be printed
Any questions or feedback please contact: software@megger.com
[Article 09-0000-01]