Download a live test result from the DLRO2X [09-0000]
How to download a live test result to CertSuite Asset from the DLRO2X handheld low resistance ohmmeter 2 A
To download test results you first need a Bluetooth connection: with the tester turned on, open CertSuite Asset ...
- Tap the red 'Connect BT' button (top right of the screen)
- CertSuite looks for the available Bluetooth devices
- Serial numbers of the available devices are listed in the 'Instrument Data' panel
- Tap the blue button that displays the serial number matching your device
- Once there is a successful connection the red 'Connect BT' button in CertSuite Asset turns green
- The button also displays the serial number of the connected device
In CertSuite tap the white 'plus' button at the bottom of the screen. The 'Add New Test' box appears:
- Tap the 'Instrument Data' button, and at the next screen tap the 'Bluetooth' button - this takes you to the 'Test details' screen in CertSuite
- On the tester - use the left hand key to ensure that the 'single test' function has been selected (i.e. as opposed to 'continuous testing')
- Press the red 'TEST' button
- When satisfied with the result on screen press the 'Save' button
- The test result is then transmitted to CertSuite, where it can be viewed in table format, and also printed
Any questions or feedback please contact: software@megger.com
[Article 09-0000-00]