Stream live test results from Megger S1/MIT Insulation Testers [09-0000]

• On the tester, turn the central rotary switch to the desired voltage setting, and the left hand rotary switch to the desired test setting
• In CertSuite, tap the white 'plus' button, at the bottom of the screen, to add a new test
• The 'Add New Test' screen appears
• Tap the 'Instrument Data' button, and at the next screen the 'Bluetooth' button
• CertSuite looks for available Bluetooth devices: serial numbers appear in the 'Instrument Data' box
• Tap the blue button that displays the serial number matching your device
• When the connection is made, the red 'Connect BT' button (top right of the screen) turns green, and displays the serial number in question

• Select 'Stream live results'
• The red 'TEST' button appears in the Instrument Data screen, with the instruction 'Press TEST for 3 seconds to start streaming'
• Moving to the tester, press and hold for 3 seconds the red 'TEST' button
• The test results will appear almost immediately in CertSuite Asset, in the form of graphs and tables
• You can scroll through the test results, with the data points accumulating as the streaming progresses

• Once the button is pressed, the 'Instrument Data' panel will display in CertSuite, with the message: 'Stream Complete: Add to stored Tests on device?'
• Tap the 'Yes' or 'No' button, directly below, according to preference
• If 'Yes' is tapped, the test results that have just been streamed to Asset will also be available for downloading at a later date
• If 'No' is tapped, the tester will not store these test results

[Article 09-0000-01]